Description
The Mass Control WTMCU22 auto pump controller is a heavy duty device to control and protect a single phase pump up to 2.2Kw (16A). The controller has 1 1/4″ ports for higher flow rate with less pressure drop. The controller will activate the pump when the system pressure drops below 2.2bar and turn pump off when pressure is above minimum required and the flow has stopped.
It will protect the pump from damage in case of a run dry failure and can be restarted with simple push button re-start.
Technical details:
- Max pressure: 10Bar
- Operating temperature range: -0 to +60°C
- Connection Thread: 1¼ ” male
- Minimum pump pressure: 3.5Bar
- Maximum pump pressure: 10Bar
- Genuine Italian Controller
