Description
Supplied with:
- Pre-wired Hydrogenie 3 Auto controller with pressure gauge
- Connection union
- Brass tee
- 2.8Litre pressure tank
Controller Feature:
- Max pressure: 12Bar
- Operating temperature range: -0 to +60ºC
- Connection Thread: 1” male
- *Cut In Pressure: Adjustable cut in pressure: 1.5, 2.0 & 2.5Bar via the control panel
- Minimum pump pressures (depending on user set cut in pressure): 1.5Bar = 3.0Bar. 2.0Bar=3.5Bar. 2.5Bar =4.0Bar
- Automatic reset/restart following run dry: If the pump runs dry the controller will attempt to re-prime 10 times over 24 hours, each attempt lasting 5 seconds.
- 24Hr Anti-Jam function: If the pump remains idle for 24 consecutive hours the controller will run the pump for 5 seconds to prevent the pump from jamming.
