Presscontrol Pump Controller

Enquire about this product
Part No.VoltsMax AmpsTurn on Pressure*Prewired
228-WTPCU23081.5BarNo
228-CTWTPCU23081.5BarYes
228-WTPCU2223082.2BarNo
228-CTWTPCU2223082.2BarYes
228-WTPCU-PCBReplacement Circuit module8

Description

The Press Control WTPCU and WTPCU22 auto pump controllers are simple and reliable devices to control and protect a single phase pump up to 1.5Kw (8A). The controller has 1″ ports for simple installation in most pump systems. The controller will activate the pump when the system pressure drops below 1.5bar (WTPCU) or 2.2bar (WTPCU22) and turn the pump off when pressure is above minimum required and the flow has stopped.

It will protect the pump from damage in case of a run dry failure and can be restarted with simple push button re-start.

Replaceable main control board for reliability and service.

Technical details:

  • Max pressure: 10Bar
  • Operating temperature range: -0 to +60°C
  • Connection Thread: 1” male
  • Protection: IP65
  • Minimum pump pressure: 3.0Bar
  • (3.5bar for 2.2bar cut in version)
  • Maximum pump pressure: 10Bar
  • Genuine Italian Controller

 Pre-wired option available for rapid install.

Pressure Loss Table
Flowrate (L/M) 50 75 100 125
Loss (bar) 0.2 0.55 0.95 /