Description
The Davies Pumps DJS Jet assisted pumps with Hydrogenie 3 and tank controller for operation and protection of the pump are particularly suited to domestic pressure systems with deep suctions up to 6m such as below ground tanks. Self-priming and very tolerant to suction lines in poor condition or undersized. Rugged stainless pump case and impeller for corrosion resistance.
Supplied with:
- Hydrogenie 3 pre-wired auto controller
- Connection union
- Brass tee
- Pressure tank
- Pressure gauge
Controller Features:
Max pressure: 12Bar
Operating temperature range: -0 to +60ºC
Connection Thread: 1” male
*Cut In Pressure: Adjustable cut in pressure: 1.5, 2.0 & 2.5Bar via the control panel
Minimum pump pressures (depending on user set cut in pressure): 1.5Bar = 3.0Bar. 2.0Bar=3.5Bar.
2.5Bar =4.0Bar
Automatic reset/restart following run dry: If the pump runs dry the controller will attempt to re-prime
10 times over 24hours, each attempt lasting 5 seconds.
24Hr Anti-Jam function: If the pump remains idle for 24 consecutive hours the controller will run the pump for 5 seconds to prevent the pump from jamming.
