Description
The Davies Pumps Hydrogenie HG 1 auto pump controller is a simple and reliable device to control and protect a single phase pump up to 1.1Kw (6A). The controller has 1″ ports for simple installation in most pump systems. The HG1 controller will activate the pump when the system pressure drops below 1.5bar and turn the pump off when pressure is above minimum required and the flow has stopped.
It will protect the pump from damage in case of a run dry failure and can be restarted with simple push button re-start.
Technical details:
- 230Volts 50/60Hz
- Max pressure: 8Bar
- Operating temperature range: -0 to +60ºC
- Connection Thread: 1” male
- IP65
- Minimum pump pressure: 3.2Bar
- Maximum pump pressure: 8Bar
- Genuine Italian Controller
